You could tell that you’d arrived at the NetHui because every seat anywhere remotely near a power source was occupied by someone hunched over an electronic device, either furiously tapping away at a keyboard or swiping at a screen.
Well, it’s taken a week – but the initial plans (PDF 268K) are now drawn up for the cabling required in the house. The plans are pretty close to the minimum we’ll require to get things up and running again, and only the difficult access areas have received anything over and above what is immediately required.
Because the move has been a little more expensive than initially projected, it looks like the cheapest option will be for me to do the installs myself – of course, without the right tools this may present it’s own set of challenges – but, I’ll endeavor to document the process for your amusement.
I’ll be crawling around this weekend getting some measurements and then it’s off to the interwebs to see where I can get the bits and pieces I’ll need.
So – we’ve now moved in, the boxes are (mostly) unpacked – I’ve even managed to organise the garage enough to fit the HondaBus into it (who knows, maybe being an internal garage with light, heat and power may see the Carputer get installed finally?).
So – with the vitals out of the way (and by vitals, I mean the stuff my Wife and kids need, not what *I* consider vital), it’s time to settle in and get the technology humming (and no – that doesn’t mean the Weather Station is back up yet 🙁 )
To recap, the Interwebs have gone from this:
But (as we found out 30 minutes before the All Blacks test on the first Saturday in the house), that’s not all – the Sky dish is connected, but not to any known cable in the house, the UHF is connected, but orphaned via a hole in the garage wall – and don’t even get me started on the gel crimp frenzy that is the phone cabling… We have 2 working phone ports – and only one of those will connect to the DSL service, of course THAT port in in the boys room, so we’ve currently got an old school ‘phone’ extension cable running from their room through to the home office.
So, in summary – I’m either looking for an installer (or two – surprisingly hard to find via web search without a word of mouth recommendation!) or will be tackling (at the very least) the following work via the good old Kiwi DIY Self Install:
- UHF / Sat: Connected and split 4 ways in ceiling space, routed to Lounge, Master Bedroom, Downstairs Rumpus and Office
- Phone Patching: Retain Master Bedroom + Shift Boys (working) port to Office for DSL
- Network: Basically, all remaining phone ports could be converted to wired network either via re terminating with RJ45 or (where the existing cables are a mess) using existing as a draw wire to pull fresh cat 5. This would give a minimum of:
- Lounge x2 (1 for IR)
- Master Bed x1
- Downstairs Rumpus x1
- Office x 4 (min)
The options then are terminating all network cables centrally in the garage and patching from there (fed from 1 or 2 in the office) or pulling a loom into the office.
From what I’ve learned from our previous house, I think the central loom in the garage will suit best as it’s out of the way and allows noisier / hotter equipment to be located away from the living spaces.
Of course, the above is my minimum requirements, I’ve also planned an optimum structure – but me and Visio will need to spend some quality time together before I can post up that plan…