Seriously, this was simple – and even better, it’s STABLE!

Instructions for this install are basically the same as those for my previous post using Ubuntu 9.04 and VM Svr 2.0.1 – except, now we need new patch files and the good folk at Ubuntu Geek have already written a great HOWTO Guide which steps through everything you need to do – so I’ll just summarise the changes in case you want to follow my guide with the changes

New Patch Files:

Get them

wget  http://www.ubuntugeek.com/images/vmware-server.2.0.1_x64-modules-2.6.30.4-fix.tgz

Unpack them

tar xvzf vmware-server.2.0.1_x64-modules-2.6.30.4-fix.tgz

Use them

sh vmware-server.2.0.1_x64-modules-2.6.30.4-fix.sh

Remove the old unpatched files

sudo rm -rf /usr/lib/vmware/modules/binary

Run the VMWare installer

sudo vmware-config.pl

If anything goes wrong and you need to start again:

Delete the vmware modules using the following command

rm -rf /usr/lib/vmware/modules/

rm -rf /lib/modules/2.6.31-13-server/misc/vm*

Now kill all vmware processes manually

kill -9 $( ps -ef | awk ‘/vm/ { print $2 }’ )

Now run vmware-install.pl file

./vmware-install.pl

at the time of installation where you see the following message type no and press enter

Before running VMware Server for the first time, you need to configure it by
invoking the following command: “/usr/bin/vmware-config.pl”.

 Do you want this
 program to invoke the command for you now? [yes] no

Now you need to run the patch script file using the following command

sh vmware-server.2.0.1_x64-modules-2.6.30.4-fix.sh

After completing this you should run vmware-config.pl

sudo /usr/bin/vmware-config.pl

Good luck! (and thanks again Ubuntu Geek)

Related posts:

1. Installing Karmic Koala (9.10) on an ASUS EEE 701 netbook So – Karmic is out, and for those who are...
2. Adding more functionality to Kubuntu 9.10 NBR In a previous article, I covered off the installation of...

Related posts brought to you by Yet Another Related Posts Plugin.